Massey Ferguson 4710 Utility Tractor Loader Cab

HEAVY DUTY – At a best-in-class base weight of 7,125 lbs., the 4700 Series is purpose-built for more pulling power and more lift capacity. Not to mention better maneuverability and more stability.

ENGINE SYSTEM
• AGCO Power 33AWIC 3 Cylinder (Turbocharged) with SCR and DOC EPA Tier 4 Final and CARB Certified
• Air Cleaner: Dual Element Dry Type
• Air Cleaner Intake, Under Hood
• Vertical Exhaust
• Cooling System: Anti freeze 50/50 Mix
• Cold Starting Aid: In take Heater

HORSEPOWER
100 Max Engine HP, 100 Engine HP, 88 PTO HP

FRONT AXLE
• 4wd: Center Driveline, Open Differential, Standard Limited Slip Differential
POWERTRAIN
• Rear Axle: In board Planetary Final Drives, with Push Button Operated Mechanical Differential Lock, Flanged Rear Axle
• Brakes: Independent Oil Immersed Wet Disc Brakes with Independent Foot Pedal Operation
• Hook and Lever Parking Brake
• PTO: Independent 540/1000 RPM Dual Speed with 6 & 21 Spline Flanged Shafts (1.375 In. Diameter), Inde pendent Wet Disc Clutch, Electro-hydraulic Engagement

HYDRAULIC SYSTEM
• 1 Mechanically Controlled Spool Valve
• Implement System: Open Center System, Engine Driven Gear Pump 17.1 GPM (65 LPM) Flow Optional Cable-controlled Loader Joystick with Mid Valves and 3rd Function Ready Buttons
• Rear Linkage: ASAE Category II with Telescopic Ball Ends Lift Capacity at 24″: 4850 LBS (2200 KG) Single Adjustable Rear Linkage Turnbuckle, Top Link Draft Sensing Standard Chain Link Stabilizers
• Swing Straight Drawbar with 350/400/500mm Positions, Cat 2 Clevis

ELECTRICAL
• 12 Volt DC, Negative Ground
• Intake Air Pre-Heater
• Wet, Maintenance Free SAE 775 CCA Battery
• 80 AMP Alternator
• Ignition: Key with Safety Start
• Keyed Engine Shut off
• Lighting: 4 Head lights, 2 Rear Marker Light Assemblies
• Rear Brake Lights
• Standard 1 Rear Work Light
• 7 Pin ASAE Outlet Socket

INSTRUMENTS
• Digital and Analog Dash Display
• Analog Engine Tachometer
• Analog Fuel Gauge
• Analog Engine Temperature
• Digital Trans mis sion Dis play
• Digital Hour Me ter
• Operation and Service Lights

OPERATOR ENVIRONMENT (CAB MODELS)
• Standard Cab Roof
• HVAC with Manual Controls
• Left-Hand & Right-Hand Doors
• Factory-Installed Antenna & Speakers
• 2 Front-Roof Mounted Work Lights
• 2 Rear-Roof Mounted Work Lights
• Pull-down Sun Shade
• Lever Controlled 3-Point Linkage
• Rubber Floor Mat
• Right and Left Side Folding Mirrors
• Tilt Steering Column
• Seat: Mechanical Spring Suspension with Armrests
• Retractable Seat Belt
• Cup Holder
• Pendant Style (Suspended) Foot Pedals
• Hand Rails with Glass Heat Shields
• Hand and Foot Throttle
• Left Side and Right Side Foot Step Entry

OTHER STANDARD FEATURES
• Fuel Tank Under Platform, Ground Fill
Fuel Capacity: 27.7 Gallons (105 Liters)
• One-Piece Tilting Hood
• Tool Box, SMV Sign

MFFL 3615 LOADER
• One Piece 4mm High Tensile Main Frame with Tapered and Emboss Arms
• Quick Attach Implement Mounting with Euro Style Single Lever Locking System
• 82 mm Arm Profile
• 70 mm Double Acting Lift Cylinders
• 75 mm Double Acting, Equal Displacement Bucket Cylinders
• Industrial Grade Hydraulic Fittings and Twin Braided Hoses, Incorporated Internally Inside Loader Boom
• Central Valve, Equalized Oil Distribution Valve with Incorporated Relief Valves
• Pivots Are Greasable and Include Industrial Grade Pins and Bushings
• 4-Flat Face Hydraulic Tips on Boom and Bucket Circuits
• Lock and Go Loader/Subframe Connection System
• Pivots Are Greasable and Include Industrial Grade Pins and Bushings
• Powder Painted with Corrosion Protection
• Bucket Level Indicator
• Front Bumper Guard (With Subframe Set)
• Buckets Have Heavy Duty, Welded-On Cutting Edge, Box Beam Section for Stiffness and Torsional Rigidity and Lateral Reinforcing Bars
• 140″ (3.55 m) Lift Height to Pivot Pin
• 3395 lb. (1540 kg) Lift Capacity to Full Height, 31.5″ (800 mm) Forward of Pivot Pin per ASABE 301.3 @ 2828 PSI
• Maximum Roll Back Angle: 58 Degrees
• Maximum Dump Angle: 58 Degrees

SKU: 7773 Category: Tag:

(970) 240-1720

Need More Info?
Fill Out The Form & Send

  • This field is for validation purposes and should be left unchanged.

HAY.DAIRY.ORCHARDS.SMALL FARMS.

ENGINE
At the heart of it all is a rugged, reliable, fuel-efficient 3.3 Liter AGCO PowerTM three-cylinder Tier 4 Final engine. These engines range from 80-100 horsepower and are specifically configured for North America.
• POWERFUL AND QUIET
The turbo-charged diesel power plant delivers maximum torque at low engine speeds. You not only get clean exhaust and miserly fuel consumption, but both noise and tractor wear and tear are reduced. You enjoy an unmatched operator experience and a very comfortable cost of operation.
• SMOOTH RUNNING
Four valves per cylinder improve airflow and enhance the fuel/air mixture, so you run cool and smooth, keeping service costs low, too.
• NO DPF FILTER
These tractors don’t require a diesel particulate filter (DPF), which also saves money, time and fuel.

A TRACTOR THAT SHOWS UP FOR WORK EVERY DAY
You’ve got a ton of different jobs to tend to each day, and the last thing you need is a feeble tractor that shies away from the really tough ones. The 4700 Series is heavier than other tractors in its class, uniquely designed to handle larger, heavier implements and more demanding applications. So yeah, it’ll be there when you need it.

• HEAVY DUTY
At a best-in-class base weight of 7,125 lbs., the 4700 Series is purpose-built for more pulling power and more lift capacity. Not to mention better maneuverability and more stability.

• NO HITCH LIKE THIS HITCH
There’s virtually no limit to the range of implements you can put behind these tractors. Two gear pumps power the simple, open-center hydraulic system, and a heavy-duty three-point hitch helps provide a rear lifting capacity of nearly 4,850 lbs.

• ADJUSTABLE WHEELS
With a wide range of wheel-spacing settings, these tractors are versatile enough to handle everything from specialty farming applications, like small-scale row crops and vegetables, to roadside mowing and land management applications.